RFID laundry label with adhesive backing (installed by hot pressing)

RZX technology RFID laundry label with gum (hot pressing installation) complies with the communication protocol EPC Class1 Gen2; ISO18000-6C, high temperature resistance, high humidity, remote group reading, suitable for clothing and linen washing, etc. The label with adhesive backing can be ironed on the linen at high temperature, easy to use, suitable for linen inventory, loan and return management, etc. To undertake mass customization, you can select the installation methods such as sewing or adhesive tape according to your needs. Before leaving the factory, you can customize according to your needs. The labels have regular sizes for easy selection. If you need to customize the size and requirements, you can also call the business personnel.

Common installation methods of RFID laundry labels:

1) Method 1: directly sew to the cloth or clothing;

2) Method 2: sew or install the bag into the cloth, and then sew the bag onto the cloth grass;

Advantages: After the cloth reaches the washing life, the bag can be cut off and installed on the new cloth, so that the label can be reused to reduce the single use cost of the label;

Disadvantages: More installation time.

3) Method 3: directly press the label on the cloth (contact the manufacturer to explain the requirements for ironing conditions before ordering in this way).

Introduction to RFID laundry label parameters:

1.1 Specification description

Air protocol: EPC Class1 Gen2; ISO18000-6C

Operating frequency: 860-960MHz (the frequency can be customized as required)

Chip type: U8 chip (can be customized according to different chips)

Chip storage: EPC 128 bits TID 48 bits

TID: TID 48 bit, TID is globally independent and cannot be modified

Reading and writing performance: readable and writable (customers can repeatedly write content to the chip 100000 times)

Data preservation: 10 years

Product service time: 2 years or more than 200 times of washing

Materials for product application: flexible textiles

Product weight: 98g/100 pieces of glue; No glue 85g/100 pieces

Product form: single

RoHS: RoHS compliant

Product color: white (other colors can be customized)

1.2 Product dimensions

Overall size (length * width * thickness): 70x15mm (thickness at chip position is 1.8 ± 0.2) (other sizes can be customized)

1.3 RF performance

Fixed reader writer: (installed on dry towel) more than 3.0 meters (4W EIRP)

(Installed and wrapped in single-layer and multi-layer wet towels) more than 1.2m (4W EIRP)

Handheld reader writer: (installed on dry towel) more than 2.0m

(Installed and wrapped in single-layer and multi-layer wet towels) more than 0.8m

Polarization mode: linear polarization

Consistency test: passed the consistency test of Voyantic, Finland

1.4 Reliability

Operating temperature: - 25 ℃~70 ℃

Ironing temperature (at 4bar pressure): 85 ° C @ 60 minutes, 120 ° C @ 10 minutes, 150 ° C @ 4 minutes, 180 ° C @ 10 seconds

Humidity: 8~100% RH

High and low temperature alternating test: 7 high and low temperature alternating cycles from - 40 ° C to+150 ° C, passed the test for 2 consecutive days

1.5 Optional

Pre write: Supported

Customized product appearance and color: support (more than 200000)

RFID laundry label (standard iron) picture display: